$189.50 + Shipping. Florida residents add 6.5% sales tax.
This set is discounted an additional 5% at checkout.
Set without magnets: $140.25 + Shipping & sales tax if applicable.
This set includes twenty-two fixtures in five sizes. The set builds
model aircraft sizes from 1/2A to Quarter-Scale and marginally larger
models.
This is the set for the builder who builds the largest
models that can comfortably fit into a hatch-back passenger vehicle with
the seats folded down but doesn't have the models crammed in so tightly
he's driving around with his head supporting part of a wing and his elbow
resting on the fin.
So generally up to 1.60 size models are very comfortably built with
this set. If 1.60 size models fall into the middle of the range you
build then consider the
Standard
Fixture Set instead.
Due to customer requests there is now an option to purchase this set
without magnets or magnet-mounting hardware.
Please be aware that
these fixtures are designed for one specific magnet and are not guaranteed
to work with any other.
|
Set
Contents:
Medium Magnetic Fixture System II Set |
Quantity |
Item |
6 |
1-1/2"
Birch Plywood Fixture |
6 |
2-1/2"
Birch Plywood Fixture |
4 |
3-1/2"
Birch Plywood Fixture |
4 |
5-1/2" Birch
Plywood Fixture |
2 |
7-1/2" Birch
Plywood Fixture |
92 |
Magnet
Assembly w/Steel Poles |
48 |
10-24 x 1"
Steel Phillips Bolt w/Hex Nut |
2 |
10-24 x
2-1/2" Steel Phillips Bolt |
4 |
10-24 x 1-5/8" Steel Phillips Bolt |
6 |
Hardwood Vertical
Press |
6 |
Hardwood
Clamp Pad |
6 |
10-24 x 1-5/8" Black Oxide Hex Head Steel Bolt |
12 |
6-32 x 5/8"
Black Oxide Steel Socket Cap Bolt |
24 |
#6 Black
Oxide Steel Flat Washer |
12 |
6-32 Black
Oxide Steel Hex Nut |
1 |
7/64" Hex
Key |
1 |
Instructions and Notes |
|
Set contains 34 hand-made wood parts. Please note that hardwood
pieces may be a different species than shown here. I use only
quality hardwoods such as maple, cherry (shown), walnut, etc.
Vertical Presses and Clamp Pads in your set will always be made from the
same species of wood.