11 - 30 - 2007 |
Secured new web hosting. I have nothing bad to say about my previous web host except my
site just kept breaking. I was calling them frequently and they always appeared very willing to work to
solve the problem. Unfortunately, it just wasn't working. As of the date of this post the site
isn't up with the new host, but the entire site is uploaded to their servers. When the name hosts propogate over
the next day or so you'll be viewing the site hosted from its new home. |
11 - 26 - 2007 |
Completed another major update that has been in process for nearly a month. This site is
created using FrontPage because regardless of what anyone says about it, it's easy to use and if I had to read
and write HTML this site wouldn't exist. Unfortunately, my web host needs to have FrontPage extensions
installed for some of the features I have on this site to work properly and that stuff keeps breaking.
FrontPage says it's my web host's fault. My web host says it's FrontPage's fault. It hasn't been
a huge problem because this site is pretty much devoid of flashy crap that on most sites takes the place of
actual content. This site has plenty to offer so flashy stuff isn't needed.
The two things I did use FrontPage features for is the site navigation at the bottom of every page and for
the site search tool. The search tool still works even though I admit it's lame as far as search tools go.
I've done a lot of internet searching to find a good site search tool but the ones that install easily
(meaning even I can figure it out) are even more lame than the one I have now. The good ones either cost a
lot of money or require a lot of technical knowledge and time that I don't have.
As far as the site navigation goes, I went through every page on the site and hard-coded it which will be a
pain to keep updated when I add pages in the middle of the site such as a new how-to article, but at least I
don't have to depend on FrontPage extensions to work.
I also made some cosmetic changes such as the box in the upper left hand corner that has the date the page
was last edited. The box was too small for names of longer months and it always bugged me but until now I
was too lazy to fix it. Hopefully nobody invents a new calendar with a longer month name like
Octonocemberary.
I added a new guestbook script. The format isn't even close to the original guest book or the rest of
the site for that matter. Before I spend a lot of hours figuring out how to modify the code to match the
rest of the site I'm going to see if the new code eliminates or at least greatly reduces the amount of spam.
Lastly, I added Google AdSense ads to every page I plan to have them on. I really didn't want to put
ads on this site either but this site is starting to incur a noticeable cost and it was either ads or a donation
button or just taking the site down. Hopefully I can now get back to building model airplanes. |
11 - 03 - 2007 |
Began adding Google AdSense advertising to site. |
11 - 02 - 2007 |
Added
How to Make a
Split Fence for a Dremel Router/Shaper Table. |
11 - 02 - 2007 |
Added
How to Make a Router/Shaper Table for use with Dremel Moto Tools. |
10 - 06 - 2007 |
Added more information about rasps and files. This information was moved from
Miscellaneous Tools to
Tools Used for Cutting. |
09 - 23 - 2007 |
Added
How to Make a Dual-Rotational, Reversible, Variable Height, Bench-Mounted Vacuum Pickup Tool Holder v2.0TM. |
09 - 23 - 2007 |
Added
Microlux
Tilting Arbor Table Saw. |
09 - 23 - 2007 |
Added
How to Make a Semi-Rigid Contour Sander. |
08 - 26 - 2007 |
Added Disk Sanders for Model
Builders. |
08 - 25 - 2007 |
Added AMT/Ertl Star
Wars Imperial Tie Fighters to Gallery. |
08 - 25 - 2007 |
Added AMT/Ertl
Star Wars
Darth Vader's Tie Fighter to Gallery. |
08 - 07 - 2007 |
Added
How to Paint a Scale Pilot Bust. |
08 - 07 - 2007 |
Added
How to Mount a Pilot Bust. |
08 - 07 - 2007 |
Added
Williams Brothers 1/4 Scale Spandau Machine Gun to the Gallery. |
08 - 06 - 07 |
Added more information to the
Airbrush page. |
07 - 31 - 2007 |
Completed Judging the 2006-2007 Design and Build
Contest. |
07 - 06 - 2007 |
Posted final 2006-2007 Design and Build Contest Entries. Judging to be completed by July 31, 2007. |
07 - 04 - 2007 |
Completed massive website update. I'm not optimistic enough to believe everything is fixed,
but hopefully most of it is. At this point I'm going to depend on my awesome visitors to point out any
errors or problems they find with the site.
This update was no small task and I spent a week writing
5,000 lines of software code to help reduce the possibility of things being missed.
- Some pages weren't in the database which means that Tell a Friend and Page Comments weren't hooked up for
those pages.
All pages having those features are now in the database.
-
Some pages have been moved as this site has evolved. In many cases I neglected to change the URL in
the database which meant that Tell a Friend would send people to a page that didn't exist. I went
through the entire database page by page to correct every URL.
-
When this site was moved to the new server, the Search feature didn't work any more. I cut and
pasted the button navigation table on the left to make my life easier. Ha! Well, I didn't think
about the fact that I changed the PageID of every page and essentially broke the entire site. That one
little time-saver was a disaster. All PageIDs have been corrected (I think).
-
Setup Guestbook to moderate entries. I really
didn't want to do that, but until I find a better way, I needed to do something to stop the spam.
-
Registration has been fixed.
Many other things were updated along the way. Most of it is stuff that happens behind the scenes and
won't make any difference to people visiting the site.
All in all it was a lot of work and hopefully everything is back on track now.
But please! If you find any errors please notify me. The one thing I haven't fixed are links to
the Glossary. Because that is Java code it doesn't automatically get updated when a page is moved.
(I really need to stop moving pages since that causes 99% of the problems with this site).
If you find any page that has broken Glossary links, please let me know and I will fix it ASAP.
One other thing... whenever I move a page it also breaks the
buttons. They look fine until you click one and then it disappears. It's another Java thing that
doesn't update when a page is moved and most of the time I'm not thinking about it so I stumble across the error
when I'm perusing the site. If you find any pages having buttons that do weird things, please let me know
about that too. I love you guys. :)
|
07 - 01 - 2007 |
The deadline for submitting entries for the
2006-2007 Design and Build Contest is passed. A lot of people dropped out but I did get several
submissions of very nicely built models. My next task is to put those pages together and get them
uploaded. |
06 - 18 - 2007 |
Added the File Name Replacement
Utility. Renames multiple screwed up filenames in a way similar to the Replace feature in a word
processor. |
06 - 07 - 2007 |
Temporarily disabled ability to post in the
Guestbook due
to dirt bag spammers. My wish is that every time one of these
people sends out spam one of his fingers bursts into flames and is
destroyed to the knuckle. Failure to learn this lesson will mean
they have no fingers left. |
04 - 18 - 2007 |
Added
Jeff Fair's Magnetic Workbench. |
04 - 14 - 2007 |
Secured new web hosting. Unfortunately, the move to
the new host meant features are implemented differently which means
every page containing PHP code or linking to pages having PHP code was
partially or fully non-functional. All articles are online and
complete. Page comments don't work properly and the search feature
has been changed. Some pages are updated.
It will be months before it's all working again. |
04 - 02 - 2007 |
Site went offline for reasons beyond my control. I
was unable to contact my web host and began searching for new hosting. |
02 - 12 - 2007 |
Added
The Amazing Scroll Saw Paint Shaker. |
02 - 12 - 2007 |
Added
How to Make Pallets for Brush Painting and Airbrushing. |
02 - 12 - 2007 |
For those who may be interested in
purchasing my Microlux Miter/Cut-Off
Machine, I have written a
set
of instructions because I can't find the ones that came with it. |
02 - 12 - 2007 |
Did some more rearranging of the site which I know I
should stop doing because I break things that I wasn't thinking about at
the time. Your help in pointing out broken links is much
appreciated. |